 |
Chromium and its compounds are used in metal alloys such as stainless steel; protective coatings on metal. Ferrochrome is used in specialist applications such as engineering steels where a high Cr to Fe ratio and minimum levels of other elements are important and production of finished metals takes place in small electric arc furnaces compared to large scale blast furnaces. |
Typical Analysis
| Product | %Cr | %C | %Si | %S | %P |
|---|---|---|---|---|---|
| Chromium Metal |
99.00 Min |
0.05 Max |
0.20 Max |
0.03 Max |
0.02 Max |
| Product | %Cr | %Si | %C | %S | %P |
|---|---|---|---|---|---|
| Ferrochrome High Carbon Low Carbon (0.025C Grade) Low Carbon (0.05C Grade) Low Carbon (0.10C Grade) Low Carbon (0.15C Grade) |
60.0 Min60.0 Min 60.0 Min60.0 Min 60.0 Min |
3.0 Max1.00 Max 1.00 Max1.00 Max 1.00 Max |
5.0-9.00.025 Max 0.05 Max0.10 Max 0.15 Max |
0.07 Max0.04 Max 0.04 Max0.04 Max 0.04 Max |
0.03 Max0.04 Max 0.04 Max0.04 Max 0.04 Max |
| Product | Standard Sizing |
|---|---|
| Chromium Metal |
2″ X 0 |
| Ferrochrome High Carbon Low Carbon (All Grades) |
4″ X 2″ 2″ X 1/2″1/2″ X 12m 2″ X 1/2″ |
The information contained is based on data available. However, no warranty is expressed or implied regarding the accuracy of the data or the results obtained from the use thereof.