 |
 |
Used in many industrial and consumer products, including stainless steel, magnets, coinage, and special alloys. Nickel is pre-eminently an alloy metal, and its chief use is in the nickel steels and nickel cast irons, of which there are innumerable varieties. |
| Typical Analysis | Nickel | |||
|---|---|---|---|---|
| Product | Size* | %Ni | %C | %Other |
| Briquettes | 1 1/2″ x 5/8″ | 99.8 Min | .01 Typical | Please inquire for additional chemical elements not listed |
| Discs | 3/4″ X 1/4″ | 99.98 Min | .007 Max | |
| Electrolytic Cathodes | Full Sheet | 99.97 Min | .008 Typical | |
| Electrolytic Squares | 1″ x 1″, 2″ x 2″, 4″ x 4″ | 99.97 Min | .008 Typical | |
| LH Rounds | 1″ Diameter x 1/5″ Thickness | 99.8 Min | .03 Max | |
| Pellets | 1/4″ Diameter | 99.98 Min | .007 Max | |
| Typical Analysis | Nickel Additives | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product | Size* | %Ni | %C | %Fe | %Si | %S | %Cu | %Pb | %Mg | %Ca |
| Cal 10 | 3# Ingot | 93-95 | 0.04 | 0.02 | 0.15 | 0.001 | 0.001 | 0.001 | NA | 5.5 |
| F Shot | 1/4″ x 30 Mesh | 91-93 | 0.3 | 3.0 | 5.0 | 0.001 | 0.01 | 0.001 | NA | NA |
| Mag 1 | 2″ x 1/4″ | 82-86 | 0.9 | 0.05 | 0.1 | 0.001 | 0.01 | 0.0001 | 15 | NA |
| Mag 3LC | 3# Ingot | 94-96 | 0.025 | 0.05 | 0.1 | 0.001 | 0.001 | 0.001 | 4.6 | NA |
| Mag 4 | 3# Ingot | 58-62 | 1.8 | 34 | 0.3 | 0.001 | 0.005 | 0.001 | 4.6 | NA |
| Mag 5 | 2″ x 1/2″ | 63 | 0.8 | 20-23 | 0.2 | NA | NA | NA | 16 | NA |
*All Sizes Are Approximate
The information contained is based on data available. However, no warranty is expressed or implied regarding the accuracy of the data or the results obtained from the use thereof.